Cleaf Yosemite Edge Banding s010

Yosemite Edge Banding S010 — Color-Matched PVC Edge Banding for Furniture Manufacturing

Edge banding S010 is a Yosemite-series PVC edge banding formulated to match the s010 decor across leading board manufacturers. Produced with precision color matching and consistent surface texture, edge banding S010 delivers a seamless transition between panel face and edge — the detail that separates professional furniture from amateur work.

Manufactured from virgin PVC resin with UV-stabilized pigments, edge banding s010 maintains color fidelity under prolonged sunlight and artificial lighting, preventing the yellowing or fading that plagues cheaper edge banding after months of display or use. Available in thicknesses from 0.4 mm to 3 mm and widths from 15 mm to 90 mm, S010 covers every application from thin-edge high-volume cabinet production to thick-edge premium furniture.

Request Edge Banding S010 Samples

Product Specifications

Custom widths, thicknesses, and roll lengths available for volume production.

Why Edge Banding S010 Delivers a Better Finished Panel？

Color Match That Holds Under Real Lighting

The most common complaint about edge banding is color mismatch — the edge looks fine in the factory but shows a visible line under showroom lighting or natural sunlight. Edge banding S010 is matched to the reference board using spectrophotometric color measurement across D65 (daylight), A (incandescent), and TL84 (fluorescent) light sources, with ΔE ≤ 1.5 — below the threshold of human perception under normal viewing conditions.

UV-stabilized pigments prevent the edge banding from fading faster than the board it is bonded to, ensuring the match remains consistent for years rather than months.

Surface Texture Consistency

A color match is incomplete if the surface texture differs — a glossy edge on a matte panel creates a visible sheen difference even when the color is exact. Edge banding S010 replicates the matte/smooth texture of the S010 board finish, with controlled surface roughness measured by profilometer to ensure the edge reads as a continuation of the panel, not a separate material.

Dimensional Tolerance That Prevents Machine Issues

Edge banding that varies in width or thickness causes tracking problems on automatic edge banders — wandering edges, uneven glue application, and premature cutter wear. Edge banding S010 is slit to ±0.1 mm width tolerance and calendered to ±0.03 mm thickness tolerance, ensuring consistent feeding through Homag, Brandt, Biesse, SCM, and Chinese edge banding machines without constant adjustment.

Virgin PVC, Not Recycled

Recycled PVC edge banding suffers from inconsistent color, poor heat stability, and surface defects. Edge banding S010 is produced from virgin PVC resin with lead-free stabilizers, delivering consistent melt behavior during edge banding, clean trimming, and a smooth finished edge without the pitting or grain that recycled material often shows.

Get Product Data

Thickness Selection for Edge Banding S010

The correct thickness depends on the application, panel edge treatment, and desired edge profile.

0.4 mm — High-volume thin-edge production. Standard for cabinet carcasses, drawer sides, and shelving where the edge is functional rather than decorative. Bonds quickly with EVA hot melt, trims cleanly, and is the most cost-effective option. Suitable for line speeds up to 25 m/min.

0.8 mm – 1.0 mm — Mid-range furniture and visible components. Provides a more substantial edge feel and better impact resistance than 0.4 mm. Commonly used on cabinet doors, desk modesty panels, and furniture where the edge is visible but not a primary design feature.

2.0 mm — Premium furniture and exposed edges. Delivers a rounded, solid-wood-like edge profile after trimming. Specified for high-end cabinetry, tabletops, and contract furniture where edge durability and appearance are critical. Requires higher glue temperature and longer open time than thin edge.

3.0 mm — Thick-edge premium and industrial applications. Creates the most pronounced rounded edge, simulating solid wood edging. Used on premium tabletops, workstations, and furniture subject to heavy impact. Requires pre-milling and dedicated thick-edge equipment.

All thicknesses of edge banding S010 are color-matched to the same reference, so you can mix thicknesses across a single furniture line without visible color variation.

Get Thickness Recommendation for Your Application

Applications

• Kitchen cabinet doors and frames— 0.4 mm or 1.0 mm depending on product line
• Bathroom vanity panels— 1.0 mm or 2.0 mm for moisture-exposed edges
• Office desks and workstations— 2.0 mm for impact-resistant exposed edges
• Wardrobe and closet interiors— 0.4 mm for carcasses, 1.0 mm for doors
• Retail display fixtures— 1.0 mm or 2.0 mm for visible edges under showroom lighting
• Hotel and contract furniture— 2.0 mm or 3.0 mm for heavy-use environments
• Drawer boxes and internal components— 0.4 mm for cost-effective production
• Shelving and bookcases— 0.4 mm or 0.8 mm

Edge banding S010 is suitable for both residential and contract furniture, with the UV stability required for pieces displayed in showrooms or used near windows.

Match Your Application

Machine Compatibility and Application Parameters

Edge banding S010 runs on all major automatic edge banding machine brands, including Homag, Brandt, IMA, Biesse, SCM, Holz-Her, Nanxing, and Jili.

Thin-edge (0.4–1.0 mm) setup: Use EVA hot melt at 170–190°C. Apply 0.10–0.15 mm glue film. Pressure roller setting 0.3–0.4 MPa. Trim with standard carbide cutters. Line speed 15–25 m/min.

Thick-edge (2.0–3.0 mm) setup: Pre-mill panel edge for a clean, square surface. Use EVA high-tack or PUR at 180–200°C (EVA) or 130°C (PUR). Apply 0.15–0.25 mm glue film. Pressure roller 0.4–0.5 MPa. Use thick-edge trimming units with radius cutters. Line speed 8–15 m/min.

Critical success factors: Pre-mill panels before thick-edge application to remove saw marks and ensure a flat bonding surface. Verify glue pot temperature with a calibrated thermometer. Maintain panel temperature above 18°C — cold panels cause premature glue setting and weak bonds.

Volume customers receive machine-specific parameter sheets and on-site setup support.

Get Machine-Specific Parameters for Edge Banding S010

Color Matching and Customization

If a particular board manufacturer is required, please send us a sample or the board manufacturer’s colour code. Edge banding S010 is matched to your board, not a standard colour.

Color matching process:

1. Please provide a sample of the board (at least 10 x 10 cm) or the manufacturer’s colour reference
2. The board colour is measured in our lab under D65, A and TL84 light sources
3. We manufacture edge banding that is matched to your board (S010)
4. You get a sample roll to compare visually and for machine trials
5. Once approved, the colour formula is locked and a master sample is kept to ensure the consistency of the colour from batch to batch

Customization options:Custom options: Custom width (10mm-100mm), custom roll length, pre-glued (hot melt pre-applied) edge banding, and printed logo/batch marking on the back.

Request a Custom Color

Quality Assurance

Every roll of edge banding S010 passes inspection before shipment:

• Color check:Spectrophotometric measurement against retained master, ΔE ≤ 1.5
• Surface inspection:Visual check for scratches, pits, color streaks, and texture variation
• Dimensional check:Width ±0.1 mm, thickness ±0.03 mm, measured at multiple points per roll
• Roll quality:No joints, no wrinkles, consistent tension throughout the roll
• Heat stability:10-minute test at 180°C — no discoloration or deformation
• Adhesion test:Bonded to standard MDF with EVA glue, peel strength ≥ 3 N/mm

Certificates of Analysis are available on request. Retained color samples stored 24 months for batch traceability. Our facility is ISO 9001 certified and REACH compliant.

Ordering, Samples, and Lead Time

Samples: 1–2 sample rolls (1–2 meters each) of edge banding S010, free of charge. Customer covers shipping. Ships within 3 working days. Includes color reference and application parameter sheet.

MOQ: Minimum order quantity for the same color and size is 3km.

Lead time: 7–15 working days for custom production. Stock colors and thicknesses often ship in 3–5 days.

Packaging: Rolls individually boxed and labeled with color code (S010), thickness, width, roll length, batch number, and production date. Palletized for container shipping.

Technical support: Color matching, machine setup guidance, troubleshooting, and on-site support for volume customers. Response within one working day.

Request a Quote

FAQ

What board manufacturers does edge banding S010 match?

Edge banding S010 is matched to the S010 decor across major board manufacturers. If you use a specific brand, send us a board sample and we will verify the match against your actual material.

Can edge banding S010 be used with PUR glue?

Yes. S010 bonds with both EVA and PUR adhesives. PUR is recommended for thick-edge (2–3 mm) applications and furniture requiring water resistance.

What is the minimum width you can produce?

Standard minimum is 12 mm. Custom widths down to 10 mm are available for volume orders.

How do I store edge banding S010?

Store in original packaging at 10–30°C, below 60% relative humidity, away from direct sunlight and heat sources. Shelf life 24 months under proper storage.

Can you match a custom color not in your standard range?

Yes. Send us a board sample and we will develop a custom match. Custom color MOQ 300 kg, lead time 15–20 working days for first batch.

What is the difference between 0.4 mm and 1.0 mm edge banding?

0.4 mm is thin-edge for high-volume, cost-sensitive production (carcasses, interiors). 1.0 mm provides a more substantial edge feel and better impact resistance for visible components (doors, desk edges).

Is edge banding S010 suitable for outdoor furniture?

S010 is formulated for interior furniture. For outdoor or high-UV applications, we recommend our ASA or acrylic-capped edge banding with enhanced UV resistance.

How fast can I get samples?

Samples are free (customer covers shipping) and ship within 3 working days. Include your board sample or manufacturer color code for a verified match.

Source Edge Banding S010 With Verified Color Match

Edge banding S010 delivers the color consistency, dimensional tolerance, and surface texture match that professional furniture manufacturers need — without the color drift, machine tracking problems, and surface defects that come from cheaper suppliers.

Send us your board sample or manufacturer color code. We will verify the match, ship free samples (customer covers shipping), and quote pricing — within one working day.

Contact Us for Edge Banding S010 Samples and Pricing